MT-PSE1008-8P combine a 8-port 10/100Mbps Ethernet switch with a IEEE802.3af standard 8-port PoE. All of 8 PoE ports can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.
MT-PSE1008-8P is a Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af PoE standard, allowing users to connect PD devices such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) without additional power. It’s convenient and cost-effective especially when the devices located in unavailable AC power.
The Plug-and-Play design make easy installation and operation, and all ports support Auto-MDI/MDIX, you don’t have to worry about the cable type any more.
Attribute |
Specification |
Standards and Protocols |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-T Fast Ethernet IEEE 802.3x Flow Control for Full-Duplex IEEE 802.3af Power over Ethernet |
Fixed Port |
10/100BASE-T ports x 8 Power Over Ethernet ports x 8 |
Port Description |
Input 8P8C RJ-45 x 1 supports Cat 5, 5E, 6 . PoE Ports Output 44~57VDC/600mA and support 100M distance for data transmission and 180M power transmission PoE power is delivered to the twist-pair pin 1/2/3/6 pin |
MAC Address |
1K |
Buffer Memory |
64K |
LED Indicators |
Power x 1. Link/Active x 8 PoE Power X 8 |
Input Voltage |
100V~240VAC,50/60Hz |
Power Consumption |
802.3af 15.4W per port and 120.0W Max. PoE Ports Output Voltage Range: 44-57VDC |
PoE Power |
15.4 watts per port max Total 8 ports 120W max |
Working Temperature |
0ºC~40ºC |
Store Temperature |
-40ºC~70ºC |
Operating Humidity |
10%~90% RH Non-Condensing |
Storage Humidity |
5%~90% RH Non-Condensing |
Applications |
PoE VoIP Phone PoE Wireless Access Points. PoE IP Camera POE IP Phone Other PD device more in further |