Shenzhen Marstars Technology Co., Ltd

Products
Home > Products > PoE Switch
  • Managed 8Port Gigabit POE Switch
  • Managed 8Port Gigabit POE Switch
Managed 8Port Gigabit POE Switch
The PoE Switch are Full managed 8-port Gigabit high power (IEEE 802.3at) PoE Switches with utilizing a compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop.With data and power supported
Brief Introduction:

The PoE Switch are Full managed 8-port Gigabit high power (IEEE 802.3at) PoE Switches with utilizing a compact factor which can be mounted in a 19-inch rack with rack-mounting kits or placed on desktop. 
With data and power supported by one unit, the PoE Switch shall reduce cables and eliminate the need for dedicated electrical outlets on the wall, ceiling or any unreachable place. Auto PoE detection and Plug and play installation makes it easy to use and with clear LED indicators to tell the working condition.

Specification:

• Max Output Power: 150W, supports at most 8* 802.3af-compliant powered devices(power/port: 15.4W) or 4*802.3at-compliant powered  devices(power/port:30W);
• Compatible with both IEEE802.3at(30W) and IEEE802.3af(15.4W), can supply power to PDs under these two standards;
• Transmitting electronic power together with data through a single network cable, free of power lines;
• Automatically detect and supply power to IEEE802.3at and IEEE 802.3af compliant powered devices(PDs);
• Advanced SAFC function, only supply power to IEEE 802.3af/at compliant PDs, no worry about damaging other private standard PoE devices or devices    without PoE function;
• Support port power supply prioritization, guarantee the continuous power supply of key nodes;
• Up to 100m network cable transmitting distance, support flexible network expansion without power line deployment concerns. Users can freely fix      their wireless APs, IP cameras or other end devices on the wall or ceiling;
• Built-in PSE power supply module, plug-and play design, easy to install;
• High security performance defending against power surge;
•Support short-circuit protection function, the switch will automatically start short-circuit function and cut off the power supply when there is  high-current or other power failures, which can efficiently defend against device damage or network failures caused by line fault or wrong  installation;
•Energy-saving green design, support auto-switch to standby mode and auto-detect cable length. It will stay in standby mode and save the power when  the port is disconnected , or provide a lower transmission power when the network cable is less than 10m;
 Support simple WEB management, easy to configure the functions of switches.

Ordering Information:

Online Service