Shenzhen Marstars Technology Co., Ltd

产品中心
首页 > 产品中心 > PoE交换机
  • 9-port 10/100M POE Switch
  • 9-port 10/100M POE Switch
9-port 10/100M POE Switch
MT-PSE1009-8P combines a 9-port 10/100Mbps Ethernet switch with IEEE802.3at standard 8-port PoE. The PoE ports can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.
Brief Introduction:

The MT-PSE1009-8P combines a 9-port 10/100Mbps Ethernet switch with IEEE802.3at standard 8-port PoE. The PoE ports can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.

MT-PSE1009-8P is a Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af PoE standard, allowing users to connect PD devices such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) without additional power. It’s convenient and cost-effective especially when the devices located in unavailable AC power.

The Plug-and-Play design make easy installation and operation, and all ports support Auto-MDI/MDIX, you don’t have to worry about the cable type any more.

Specification:
• 4 PoE ports in a small-size 5-port Ethernet Switch

• Compact design for home and SOHO use
• Supports standard Cat5, 5E, 6 cable
• Plug-and-play convenient operation
• Each PoE port provides 15.4W max power to connected PD devices

Attribute

Specification

Standards

IEEE 802.3 10BASE-T Ethernet 

IEEE 802.3u 100BASE-T Fast Ethernet

IEEE 802.3x Flow Control for Full-Duplex

IEEE 802.3af Power over Ethernet

Protocol

CSMA/CD

Data Transfer Rate

Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) 

Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex)

Network Cables

10Base-T: 2-pair UTP Cat 3, 4, 5 up to 100 meters.

100Base-T : 2-pair UTP Cat 5, 5e up to 100 meters.

Fixed Port

10/100BASE-T ports x 8

Power Over Ethernet ports x 4

LED Indicators

Power x 1.

Link/Active x 8

PoE Power X 4

MAC Address

1K

MAC Address Learning

Automatic update

Buffer Memory

64K

PoE power on RJ-45

PoE Power "+": pin 3 & pin 6;  Power "-" pin 1 & pin 2

Power Supply

Input: 110V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC / 2A

Power Consumption

8.0 watts ( no PD connected)

60 watts ( 8 PoE ports 15.4W/port)

Working Temperature

0ºC~40ºC

Store Temperature

-40ºC~70ºC

Operating Humidity

10%~90% RH Non-Condensing

Storage Humidity

5%~90% RH Non-Condensing

Applications

PoE VoIP Phone

PoE Wireless Access Points. 

PoE IP Camera 

POE IP Phone 

Other PD more in further


Ordering Information:

在线客服