MT-PSE3008-8P combine a 8-port 10/100/1000Mbps Ethernet switch with a IEEE802.3af/at standard 8-port PoE. All 8 PoE ports can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.
Brief Introduction:
MT-PSE3008-8P combine a 8-port 10/100/1000Mbps Ethernet switch with a IEEE802.3af/at standard 8-port PoE. All 8 PoE ports can provide 15.4W power as well as 10/100M data transmission through the Cat5/5e/6 cables.
MT-PSE3008-8P is a Power Source Equipment (PSE) and fully compatible with Powered Devices (PD) that comply with the IEEE 802.3af PoE standard, allowing users to connect PD devices such as wireless Access Points (APS), VOIP phone, IP camera, printer and Network Attached Storage (NAS) without additional power. It’s convenient and cost-effective especially when the devices located in unavailable AC power.
The Plug-and-Play design make easy installation and operation, and all ports support Auto-MDI/MDIX, you don’t have to worry about the cable type any more.
• 8 PoE ports in desktop 8-port Gigabit Ethernet Switch
• with 8 x 10/100/1000Mbps-T
• Design for home and SOHO use
• Supports standard Cat5, 5E, 6 cables
• Plug-and-play convenient operation
• Each PoE port provides 15.4W max power to connected PD
Attribute |
Specification |
Standards |
IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-T Fast Ethernet IEEE 802.3x Flow Control for Full-Duplex IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3af Power over Ethernet |
Protocol |
CSMA/CD |
Data Transfer Rate |
Ethernet: 10Mbps (half-duplex), 20Mbps (full-duplex) Fast Ethernet: 100Mbps (half-duplex), 200Mbps (full-duplex) Gigabit Ethernet: 2000Mbps (full duplex) |
Network Cables |
Twisted-pair copper cable Cat 3,4,5,5E,6 up to 100 meters LC single-mode or Multi-mode fiber cable |
Fixed Port |
10/100/1000BASE-T port x 8 Power Over Ethernet ports x 8 |
LED Indicators |
10/100/1000M X 8
PoE Power X 8 |
MAC Address |
4K |
MAC Address Learning |
Automatic update |
Buffer Memory |
2.75Mb bytes |
PoE power on RJ-45 |
PoE Power "+": pin 3 & pin 6; Power "-" pin 1 & pin 2 |
Power Supply |
Input: 110V ~ 240VAC, 50Hz ~ 60Hz. Output: 48VDC / 2.5A |
Power Consumption |
8.0 watts ( no PD connected) 120 watts ( 8 PoE ports 15.4w/port) |
Working Temperature |
0ºC~40ºC |
Store Temperature |
-40ºC~70ºC |
Operating Humidity |
10%~90% RH Non-Condensing |
Storage Humidity |
5%~90% RH Non-Condensing |
Applications |
PoE VoIP Phone PoE Wireless Access Points. PoE IP Camera POE IP Phone Other PD more in further |
Ordering Information: